Home :: Login
Forums :: Album list :: Last uploads :: Last comments :: Most viewed :: Top rated :: My Favorites :: Search

Last additions - 4x4events
Impalafest_2006_626.jpeg
Impalafest_2006_626.jpeg26 viewsPicture taken during Impalafest 2006.4x4eventsOct 06, 2006
P1010032.JPG
P1010032.JPGhead36 viewsMasking tape on the cylinder head.4x4eventsSep 05, 2006
P1010033.JPG
P1010033.JPGheads38 viewsHeads being masked off.4x4eventsSep 05, 2006
P1010034.JPG
P1010034.JPGhead35 viewsHead painted.4x4eventsSep 05, 2006
P1010026.JPG
P1010026.JPGcam_bearings38 viewsPicture of the cam bearings.4x4eventsSep 05, 2006
P1010027.JPG
P1010027.JPGhead36 viewsCylinder head.4x4eventsSep 05, 2006
P1010028.JPG
P1010028.JPGhead34 viewsCylinder head ready for paint.4x4eventsSep 05, 2006
P1010029.JPG
P1010029.JPGpan33 viewsOil pan painted.4x4eventsSep 05, 2006
P1010030.JPG
P1010030.JPGpan25 viewsOil pan painted.4x4eventsSep 05, 2006
P1010021.JPG
P1010021.JPGcrank27 viewsCrank is installed.4x4eventsSep 05, 2006
P1010022.JPG
P1010022.JPGgaskets16 viewsBox of gaskets.4x4eventsSep 05, 2006
P1010023.JPG
P1010023.JPGheads18 viewsCylinder head cleaned up and ready for paint.4x4eventsSep 05, 2006
P1010024.JPG
P1010024.JPGblock14 viewsMotor going back together.4x4eventsSep 05, 2006
P1010025.JPG
P1010025.JPGblock24 viewsMotor going back together.4x4eventsSep 05, 2006
P1010016.JPG
P1010016.JPGblock16 viewsPainted block on the engine stand.4x4eventsSep 05, 2006
P1010017.JPG
P1010017.JPGblock20 viewsAnother view of the painted block.4x4eventsSep 05, 2006
P1010018.JPG
P1010018.JPGblock15 viewsBlock is painted.4x4eventsSep 05, 2006
P1010019.JPG
P1010019.JPGbearing17 viewsPicture of the parts sorted on the tray.4x4eventsSep 05, 2006
P1010020.JPG
P1010020.JPGbearings12 viewsConnecting rod bearings being fitted. Wow, this little thing
turned out to be VERY expensive.
4x4eventsSep 05, 2006
P1010011~0.JPG
P1010011~0.JPGblock15 viewsBlock all masked off ready for paint.4x4eventsSep 05, 2006
P1010012~0.JPG
P1010012~0.JPGpistons16 viewsPrepping the internals.4x4eventsSep 05, 2006
P1010013.JPG
P1010013.JPGpistons16 viewsPistons sorted on the table.4x4eventsSep 05, 2006
P1010014.JPG
P1010014.JPGpistons17 viewsPistons sorted on the table.4x4eventsSep 05, 2006
P1010015.JPG
P1010015.JPGblock11 viewsEngine block painted.4x4eventsSep 05, 2006
P1010006~0.JPG
P1010006~0.JPGblock12 viewsEngine block in the back of the truck. Fresh from the machine shop.4x4eventsSep 05, 2006
P1010007~0.JPG
P1010007~0.JPGpistons15 viewsPicture of the pistons and rods.4x4eventsSep 05, 2006
P1010008~0.JPG
P1010008~0.JPGflywheel16 viewsPicture of the flywheel.4x4eventsSep 05, 2006
P1010009~0.JPG
P1010009~0.JPGblock17 viewsBlock ready for paint.4x4eventsSep 05, 2006
P1010010~0.JPG
P1010010~0.JPGblock14 viewsEngine block being taped off for painting.4x4eventsSep 05, 2006
P1010001~0.JPG
P1010001~0.JPGgaskets14 viewsBox of new gaskets and timing gears.4x4eventsSep 05, 2006
P1010002~0.JPG
P1010002~0.JPGpiston14 viewsPicture of the new Hypereutectic piston and connecting rod.4x4eventsSep 05, 2006
P1010003~0.JPG
P1010003~0.JPGpiston14 viewsCloseup of the new .030 over Hypereutectic piston.4x4eventsSep 05, 2006
P1010004~0.JPG
P1010004~0.JPGcrank14 viewsPicture of the crank. Had the crank mains and connecting rods
turned .010 and .010.
4x4eventsSep 05, 2006
P1010005~0.JPG
P1010005~0.JPGblock12 viewsEngine block back from the machine shop. The cylinders
were bored .030 over. Motor is now a 355 ci.
4x4eventsSep 05, 2006
P4080112.JPG
P4080112.JPGmotor27 viewsJust about finished.4x4eventsAug 29, 2006
P4110113.JPG
P4110113.JPGnose15 viewsMotor is done, just need the nose put back on.4x4eventsAug 29, 2006
P4110116.JPG
P4110116.JPGmotor16 viewsMost things done now.4x4eventsAug 29, 2006
P4080107.JPG
P4080107.JPGmotor17 viewsA few more things and we are complete.4x4eventsAug 29, 2006
P4080108.JPG
P4080108.JPGmotor27 viewsOnly a few items left to go.4x4eventsAug 29, 2006
P4080109.JPG
P4080109.JPGmotor20 viewsMotor almost done.4x4eventsAug 29, 2006
P4080110.JPG
P4080110.JPGmotor25 viewsMotor almost done and rail has been painted.4x4eventsAug 29, 2006
P4080111.JPG
P4080111.JPGmotor25 viewsMotor almost done.4x4eventsAug 29, 2006
P5270085.JPG
P5270085.JPGprogress16 viewsGetting more work done. Frame rail painted as well.4x4eventsAug 29, 2006
P5270086.JPG
P5270086.JPGrockers14 viewsView of new 1.6 ratio roller rockers going on. I also upgraded to 7/16 screw in rocker studs.4x4eventsAug 29, 2006
P5270087.JPG
P5270087.JPGengine12 viewsView of engine.4x4eventsAug 29, 2006
P4040105.JPG
P4040105.JPGbrakes11 viewsCompleted brakes.4x4eventsAug 29, 2006
P4040106.JPG
P4040106.JPGbrakes14 viewsCompleted brake.4x4eventsAug 29, 2006
P4040103.JPG
P4040103.JPGbrackets12 viewsEngine brackets.4x4eventsAug 29, 2006
P4040104.JPG
P4040104.JPGcolor21 viewsEngine going back together. (rocker covers were powder coated the wrong color of black, took them back and got them red, now they don't match the intake. Too much orange tint in them now. Going back again for another try.)4x4eventsAug 29, 2006
P5270082.JPG
P5270082.JPGengine14 viewsView of engine bay as work moves on.4x4eventsAug 29, 2006
P5270083.JPG
P5270083.JPGmotor12 viewsMotor going back together.4x4eventsAug 29, 2006
P5270084.JPG
P5270084.JPGengine12 viewsView of motor rebuild test fitting water pump. (new water pump with an original cover.)4x4eventsAug 29, 2006
P5280096~0.JPG
P5280096~0.JPGparts12 viewsView of parts on the skid.4x4eventsAug 28, 2006
P5280097~0.JPG
P5280097~0.JPGparts17 viewsAll the finished parts laid out.4x4eventsAug 28, 2006
P5280098.JPG
P5280098.JPGparts15 viewsCompleted parts.4x4eventsAug 28, 2006
P5280099.JPG
P5280099.JPGparts13 viewsHood spring and brackets.4x4eventsAug 28, 2006
P5270092.JPG
P5270092.JPGpart16 viewsAnother shot of the bumper frame with new paint.4x4eventsAug 28, 2006
P5270094.JPG
P5270094.JPGparts14 viewsFinished peices wrapped up. Was like Christmas.4x4eventsAug 28, 2006
P5270095.JPG
P5270095.JPGbracket16 viewsPic of engine bracket. (powder coated the wrong color.)4x4eventsAug 28, 2006
P5260074.JPG
P5260074.JPGintake15 viewsIntake is powder coated.4x4eventsAug 28, 2006
P5270080.JPG
P5270080.JPGparts12 viewsFinished parts shrink wrapped, ready for me to take home.4x4eventsAug 28, 2006
P5270090.JPG
P5270090.JPGparts17 viewsJust got the part back. Still unwrapping them.4x4eventsAug 28, 2006
P5270091.JPG
P5270091.JPGcover16 viewsWater pump cover.4x4eventsAug 28, 2006
P5270093.JPG
P5270093.JPGbumper13 viewsPic of bumper frame cleaned and repainted.4x4eventsAug 28, 2006
P5260079.JPG
P5260079.JPGparts12 viewsParts completed on skid.4x4eventsAug 28, 2006
P5240070.JPG
P5240070.JPGsupport21 viewsRadiator support after being blasted.4x4eventsAug 28, 2006
P5260071.JPG
P5260071.JPGparts20 viewsParts completed.4x4eventsAug 28, 2006
P5260072.JPG
P5260072.JPGheader13 viewsHeader cermachromed.4x4eventsAug 28, 2006
P5260073.JPG
P5260073.JPGpart16 viewsWater pump cover.4x4eventsAug 28, 2006
P5260075.JPG
P5260075.JPGpart12 viewsAir pipe out from powder coating.4x4eventsAug 28, 2006
P5240065.JPG
P5240065.JPGparts15 viewsBlasted plate holder.4x4eventsAug 28, 2006
P5240066.JPG
P5240066.JPGparts22 viewsBlasted bracket.4x4eventsAug 28, 2006
P5240067.JPG
P5240067.JPGparts15 viewsBlasted rotors. Finished surface was masked off.4x4eventsAug 28, 2006
P5240068.JPG
P5240068.JPGparts15 viewsBlasted parts on skid.4x4eventsAug 28, 2006
P5240069.JPG
P5240069.JPGparts16 viewsBlasted parts on skid.4x4eventsAug 28, 2006
P5240060.JPG
P5240060.JPGparts14 viewsBlasted intake.4x4eventsAug 28, 2006
P5240061.JPG
P5240061.JPGparts13 viewsBlasted header.4x4eventsAug 28, 2006
P5240062.JPG
P5240062.JPGparts15 viewsBlasted rocker cover.4x4eventsAug 28, 2006
P5240063.JPG
P5240063.JPGparts13 viewsBlasted radiator support.4x4eventsAug 28, 2006
P5240064.JPG
P5240064.JPGparts20 viewsBlasted calipers (front and rear) and water pump cover.4x4eventsAug 28, 2006
P5210055.JPG
P5210055.JPGparts21 viewsPainted some parts that are going to be re-used.4x4eventsAug 28, 2006
P5210056.JPG
P5210056.JPGblock13 viewsBlock covered to prevent FOD.4x4eventsAug 28, 2006
P5210057.JPG
P5210057.JPGparts13 viewsCam and fuel rails.4x4eventsAug 28, 2006
P5210058.JPG
P5210058.JPGcover18 viewsTiming cover.4x4eventsAug 28, 2006
P5240059.JPG
P5240059.JPGsand_blasting13 viewsParts out from sand blasting.4x4eventsAug 28, 2006
P5210050.JPG
P5210050.JPGbearings17 viewsView of all the cam bearings.4x4eventsAug 28, 2006
P5210051.JPG
P5210051.JPGcam22 viewsCam and timing cover.4x4eventsAug 28, 2006
P5210052.JPG
P5210052.JPGparts15 viewsNew engine parts.4x4eventsAug 28, 2006
P5210053.JPG
P5210053.JPGgaskets23 viewsNew gaskets.4x4eventsAug 28, 2006
P5210054.JPG
P5210054.JPGblock14 viewsBlock covered to prevent FOD.4x4eventsAug 28, 2006
P5180045.JPG
P5180045.JPGparts12 viewsBox-O-parts ready for powder coating.4x4eventsAug 28, 2006
P5180046.JPG
P5180046.JPGtanks18 viewsWasher fluid and overflow tank.4x4eventsAug 28, 2006
P5180047.JPG
P5180047.JPGhoses15 viewsHoses stashed away.4x4eventsAug 28, 2006
P5180048.JPG
P5180048.JPGparts13 viewsMore parts.4x4eventsAug 28, 2006
P5210049.JPG
P5210049.JPGblock15 viewsBlock covered to prevent FOD.4x4eventsAug 28, 2006
P5180040.JPG
P5180040.JPGparts14 viewsParts on the cart.4x4eventsAug 28, 2006
P5180041.JPG
P5180041.JPGheads12 viewsOld cylinder head.4x4eventsAug 28, 2006
P5180042.JPG
P5180042.JPGwater_pump13 viewsOld water pump.4x4eventsAug 28, 2006
P5180043.JPG
P5180043.JPGparts16 viewsParts loaded in the back of my truck.4x4eventsAug 28, 2006
P5180044.JPG
P5180044.JPGtruck15 viewsParts loaded in the back of my truck.4x4eventsAug 28, 2006
237 files on 3 page(s) 1