| Most viewed - Car Rebuild album |
P5240064.JPGparts190 viewsBlasted calipers (front and rear) and water pump cover.4x4events
|
|
P5180024.JPGdriver_fender188 viewsDriver's side inner fender.4x4events
|
|
P5210053.JPGgaskets184 viewsNew gaskets.4x4events
|
|
P4080108.JPGmotor182 viewsOnly a few items left to go.4x4events
|
|
P5210055.JPGparts182 viewsPainted some parts that are going to be re-used.4x4events
|
|
P5180043.JPGparts180 viewsParts loaded in the back of my truck.4x4events
|
|
P5180036.JPGdecal174 viewsPicture of decal that will be removed when the radiator support gets sand blasted.4x4events
|
|
P5180026.JPGfront167 viewsView of front of car.4x4events
|
|
P5270090.JPGparts145 viewsJust got the part back. Still unwrapping them.4x4events
|
|
P5180047.JPGhoses143 viewsHoses stashed away.4x4events
|
|
P5260073.JPGpart142 viewsWater pump cover.4x4events
|
|
P4080110.JPGmotor141 viewsMotor almost done and rail has been painted.4x4events
|
|
P5240066.JPGparts139 viewsBlasted bracket.4x4events
|
|
P5280097~0.JPGparts139 viewsAll the finished parts laid out.4x4events
|
|
P4040106.JPGbrakes138 viewsCompleted brake.4x4events
|
|
P4080112.JPGmotor138 viewsJust about finished.4x4events
|
|
P5280099.JPGparts137 viewsHood spring and brackets.4x4events
|
|
P4040104.JPGcolor136 viewsEngine going back together. (rocker covers were powder coated the wrong color of black, took them back and got them red, now they don't match the intake. Too much orange tint in them now. Going back again for another try.)4x4events
|
|
P5260072.JPGheader136 viewsHeader cermachromed.4x4events
|
|
P4080109.JPGmotor134 viewsMotor almost done.4x4events
|
|
P5240061.JPGparts134 viewsBlasted header.4x4events
|
|
P5240062.JPGparts134 viewsBlasted rocker cover.4x4events
|
|
P5260074.JPGintake134 viewsIntake is powder coated.4x4events
|
|
P4080111.JPGmotor133 viewsMotor almost done.4x4events
|
|
P5210050.JPGbearings133 viewsView of all the cam bearings.4x4events
|
|
P5210051.JPGcam133 viewsCam and timing cover.4x4events
|
|
P5180040.JPGparts132 viewsParts on the cart.4x4events
|
|
P4080107.JPGmotor131 viewsA few more things and we are complete.4x4events
|
|
P5180019.JPGsupport131 viewsRadiator support frame. Brown discoloration caused from coolant and battery acid.4x4events
|
|
P5210058.JPGcover131 viewsTiming cover.4x4events
|
|
P5270082.JPGengine131 viewsView of engine bay as work moves on.4x4events
|
|
P5270085.JPGprogress131 viewsGetting more work done. Frame rail painted as well.4x4events
|
|
P5270091.JPGcover131 viewsWater pump cover.4x4events
|
|
P5180046.JPGtanks130 viewsWasher fluid and overflow tank.4x4events
|
|
P5260071.JPGparts130 viewsParts completed.4x4events
|
|
P5240070.JPGsupport129 viewsRadiator support after being blasted.4x4events
|
|
P5270092.JPGpart129 viewsAnother shot of the bumper frame with new paint.4x4events
|
|
P5180041.JPGheads128 viewsOld cylinder head.4x4events
|
|
P5240060.JPGparts128 viewsBlasted intake.4x4events
|
|
P5240067.JPGparts128 viewsBlasted rotors. Finished surface was masked off.4x4events
|
|
P5270083.JPGmotor128 viewsMotor going back together.4x4events
|
|
P5280098.JPGparts128 viewsCompleted parts.4x4events
|
|
P4110113.JPGnose127 viewsMotor is done, just need the nose put back on.4x4events
|
|
P5240063.JPGparts127 viewsBlasted radiator support.4x4events
|
|
P5240065.JPGparts127 viewsBlasted plate holder.4x4events
|
|
P5240069.JPGparts127 viewsBlasted parts on skid.4x4events
|
|
P5180011.JPGparts126 viewsSome parts removed from the car.4x4events
|
|
P5270080.JPGparts126 viewsFinished parts shrink wrapped, ready for me to take home.4x4events
|
|
P5180017.JPGparts125 viewsParts stacked on the cart.4x4events
|
|
P5180022.JPGheaders125 viewsHeaders ready to go to cermachrome. (ceramic/coating)4x4events
|
|
P5180044.JPGtruck125 viewsParts loaded in the back of my truck.4x4events
|
|
P5180048.JPGparts125 viewsMore parts.4x4events
|
|
P5210049.JPGblock125 viewsBlock covered to prevent FOD.4x4events
|
|
P5270087.JPGengine125 viewsView of engine.4x4events
|
|
P5270093.JPGbumper125 viewsPic of bumper frame cleaned and repainted.4x4events
|
|
P5210052.JPGparts124 viewsNew engine parts.4x4events
|
|
P5210054.JPGblock124 viewsBlock covered to prevent FOD.4x4events
|
|
P5180014.JPGhardware123 viewsAll the hardware bagged and tagged. (so you can remember where that funny washer goes, or that odd length bolt.)4x4events
|
|
P5180020.JPGradiator123 viewsRadiator up against the wall.4x4events
|
|
P5240068.JPGparts123 viewsBlasted parts on skid.4x4events
|
|
P5270086.JPGrockers123 viewsView of new 1.6 ratio roller rockers going on. I also upgraded to 7/16 screw in rocker studs.4x4events
|
|
P5210057.JPGparts122 viewsCam and fuel rails.4x4events
|
|
P5270094.JPGparts122 viewsFinished peices wrapped up. Was like Christmas.4x4events
|
|
P5180007.JPGaxle121 viewsPic of passenger side rear tire removed.4x4events
|
|
P5180015.JPGintake121 viewsCAI...Cold Air Intake4x4events
|
|
P5180030.JPGengine120 viewsView of timing gears.4x4events
|
|
P5180016.JPGhoses119 viewsHoses and plastic pieces sorted in their own area.4x4events
|
|
P5180033.JPGengine119 viewsView of engine block from passenger fender.4x4events
|
|
P5180027.JPGpassenger_fender118 viewsView from passenger side fender.4x4events
|
|
P5180028.JPGfront118 viewsPic of front of car.4x4events
|
|
P5180042.JPGwater_pump118 viewsOld water pump.4x4events
|
|
P5180045.JPGparts118 viewsBox-O-parts ready for powder coating.4x4events
|
|
P5210056.JPGblock118 viewsBlock covered to prevent FOD.4x4events
|
|
P5270095.JPGbracket118 viewsPic of engine bracket. (powder coated the wrong color.)4x4events
|
|
P5180037.JPGradiator_support117 viewsRadiator support ready for powder coating.4x4events
|
|
P4040105.JPGbrakes116 viewsCompleted brakes.4x4events
|
|
P5180010~0.JPGparts116 viewsMore parts removed from the car.4x4events
|
|
P4040103.JPGbrackets115 viewsEngine brackets.4x4events
|
|
P5180038.JPGcar115 viewsCar sitting on the jacks.4x4events
|
|
P5180013.JPGhood114 viewsHood is removed.4x4events
|
|
P5180023.JPGparts114 viewsBox-O-parts ready to go to powder coating.4x4events
|
|
P5180032.JPGengine114 viewsView of engine block from driver side fender.4x4events
|
|
P5240059.JPGsand_blasting114 viewsParts out from sand blasting.4x4events
|
|
P5180018.JPGparts113 viewsBrackets and alternator.4x4events
|
|
P5180021.JPGrotors113 viewsParts ready for powder coating.4x4events
|
|
P5180031.JPGabs113 viewsClose-up of ABS unit, steering box and frame rail.4x4events
|
|
P5180039.JPGparts113 viewsParts stacked on cart.4x4events
|
|
P5180002.JPGfender112 viewsFront view of car coming apart.4x4events
|
|
P5180025.JPGfront112 viewsFront shot of engine bay.4x4events
|
|
P5180001.JPGfront111 viewsAngled front view of car coming apart.4x4events
|
|
P5180012.JPGbumper cover110 viewsPlastic nose that covers the bumper.4x4events
|
|
P5180034.JPGdecal109 viewsPicture of decal that will be removed when the radiator support gets sand blasted.4x4events
|
|
P5260079.JPGparts109 viewsParts completed on skid.4x4events
|
|
P5180008.JPGparts108 viewsParts removed from car being sorted on shop floor.4x4events
|
|
P5260075.JPGpart103 viewsAir pipe out from powder coating.4x4events
|
|
P4110116.JPGmotor102 viewsMost things done now.4x4events
|
|
P5270084.JPGengine102 viewsView of motor rebuild test fitting water pump. (new water pump with an original cover.)4x4events
|
|
P5280096~0.JPGparts100 viewsView of parts on the skid.4x4events
|
|
P5180005.JPGtrunk99 viewsStuff just being stored in the trunk.4x4events
|
|
P5180004.JPGaxle98 viewsRear wheel removed on driver's side.4x4events
|
|
| 105 files on 2 page(s) |
 |
1 | |
|
