| Most viewed - Rtxcoons Stuff |

DSC00048.JPGnew bike407 views2000 road king classicRtxcoon
|
|

tool_tx_march_07_001.jpg5" stacks215 viewsboth trucksRtxcoon
|
|

DSC012.JPGcooler install208 viewsnew vert support, holes for cac tubes, etcRtxcoon
|
|
|

DSC00047.JPGnew bike2205 views2000 road king classicRtxcoon
|
|

tool_tx_march_07_003.jpgpig truck193 views5" turnoutsRtxcoon
|
|

tool_tx_march_07_002.jpgnone192 viewssomeRtxcoon
|
|

DSC00049.JPGnew "to me" Harley187 views2000 road king classicRtxcoon
|
|
|
|
|
|

tool_tx_march_07_004.jpgred and white162 views5" stacks on both trucksRtxcoon
|
|

DSC0103.JPGintercooler install154 viewsdrivers side lower mountRtxcoon
|
|
|

DSC000003.JPGhome grown stacks142 viewshome grown stacksRtxcoon
|
|
|
|

DSC010.JPGcooler install136 viewsnew vert support, holes for cac tubes, etcRtxcoon
|
|

01_at_speedworks2.jpg135 viewsRtxcoon
|
|

DSC0107.JPGintercooler install132 viewslatch modRtxcoon
|
|

DSC1004.JPGintercooler install132 viewsdrivers side lower mountRtxcoon
|
|

cutOring.jpgcut oring on injector131 viewscut oring on injector, rumor has several of these can cause miss at idle, these went back into the truck with fixing them, just rotated the steel backer ring and put them back in....guess a rering job is in my futureRtxcoon
|
|
|

DSC00005.JPGintercooler install 127 viewswas making good progress on the install, until it started raining....front end is torn down, all brackets are fabbed and moved, have to cut holes, and mount everything....still dont know where the tranny cooler will fit...we shall see...Rtxcoon
|
|
|

DSC010~0.JPGcooler install123 viewsnew vert support, holes for cac tubes, etcRtxcoon
|
|

Banks2.JPGBanks Intercooler pipe kit122 viewsordered from Banks to install 6.0 intercooler, in progress as I type....except its raining, and I havent finished yetRtxcoon
|
|

2001_truck_on_dyno.jpg121 viewsRtxcoon
|
|

DSC1002.JPGintercooler install121 viewspassenger side lower mountRtxcoon
|
|

6_0intercoolenot_included1.JPGBanks Intercooler pipe kit118 viewsordered from Banks to install 6.0 intercooler, in progress as I type....except its raining, and I havent finished yetRtxcoon
|
|

Copy_of_a_004.jpgre114 viewsRtxcoon
|
|

DSC00008.JPGfront end torn down for intercooler install111 viewsyou can see the Sky Rsk cross tube interferes a little with the vertical support lower mount bolt...I just notched the
bolt hole in the support and loosened the bolt and slide it straight up...
Rtxcoon
|
|
|
|
|
|
|
|