Home :: Login
Forums :: Album list :: Last uploads :: Last comments :: Most viewed :: Top rated :: My Favorites :: Search

Home > Members Galleries > 4x4events > LT1 Motor Rebuild album

TITLE  +   - 
FILE NAME  +   - 
DATE  +   - 
POSITION  +   - 
P1010001~0.JPG
P1010001~0.JPGgaskets14 viewsBox of new gaskets and timing gears.4x4events
P1010002~0.JPG
P1010002~0.JPGpiston14 viewsPicture of the new Hypereutectic piston and connecting rod.4x4events
P1010003~0.JPG
P1010003~0.JPGpiston14 viewsCloseup of the new .030 over Hypereutectic piston.4x4events
P1010004~0.JPG
P1010004~0.JPGcrank14 viewsPicture of the crank. Had the crank mains and connecting rods
turned .010 and .010.
4x4events
P1010005~0.JPG
P1010005~0.JPGblock12 viewsEngine block back from the machine shop. The cylinders
were bored .030 over. Motor is now a 355 ci.
4x4events
P1010006~0.JPG
P1010006~0.JPGblock12 viewsEngine block in the back of the truck. Fresh from the machine shop.4x4events
P1010007~0.JPG
P1010007~0.JPGpistons15 viewsPicture of the pistons and rods.4x4events
P1010008~0.JPG
P1010008~0.JPGflywheel16 viewsPicture of the flywheel.4x4events
P1010009~0.JPG
P1010009~0.JPGblock17 viewsBlock ready for paint.4x4events
P1010010~0.JPG
P1010010~0.JPGblock14 viewsEngine block being taped off for painting.4x4events
P1010011~0.JPG
P1010011~0.JPGblock15 viewsBlock all masked off ready for paint.4x4events
P1010012~0.JPG
P1010012~0.JPGpistons16 viewsPrepping the internals.4x4events
P1010013.JPG
P1010013.JPGpistons16 viewsPistons sorted on the table.4x4events
P1010014.JPG
P1010014.JPGpistons17 viewsPistons sorted on the table.4x4events
P1010015.JPG
P1010015.JPGblock11 viewsEngine block painted.4x4events
P1010016.JPG
P1010016.JPGblock16 viewsPainted block on the engine stand.4x4events
P1010017.JPG
P1010017.JPGblock20 viewsAnother view of the painted block.4x4events
P1010018.JPG
P1010018.JPGblock16 viewsBlock is painted.4x4events
P1010019.JPG
P1010019.JPGbearing17 viewsPicture of the parts sorted on the tray.4x4events
P1010020.JPG
P1010020.JPGbearings12 viewsConnecting rod bearings being fitted. Wow, this little thing
turned out to be VERY expensive.
4x4events
P1010021.JPG
P1010021.JPGcrank28 viewsCrank is installed.4x4events
P1010022.JPG
P1010022.JPGgaskets16 viewsBox of gaskets.4x4events
P1010023.JPG
P1010023.JPGheads18 viewsCylinder head cleaned up and ready for paint.4x4events
P1010024.JPG
P1010024.JPGblock14 viewsMotor going back together.4x4events
P1010025.JPG
P1010025.JPGblock25 viewsMotor going back together.4x4events
P1010026.JPG
P1010026.JPGcam_bearings40 viewsPicture of the cam bearings.4x4events
P1010027.JPG
P1010027.JPGhead37 viewsCylinder head.4x4events
P1010028.JPG
P1010028.JPGhead36 viewsCylinder head ready for paint.4x4events
P1010029.JPG
P1010029.JPGpan34 viewsOil pan painted.4x4events
P1010030.JPG
P1010030.JPGpan26 viewsOil pan painted.4x4events
P1010032.JPG
P1010032.JPGhead38 viewsMasking tape on the cylinder head.4x4events
P1010033.JPG
P1010033.JPGheads40 viewsHeads being masked off.4x4events
P1010034.JPG
P1010034.JPGhead37 viewsHead painted.4x4events
   
33 files on 1 page(s)